Dry Herb & Heat-Not-Burn Devices

Loose-leaf ovens and HNB stick holders — two categories that are often confused and behave very differently.

Dry herb vaporizers heat loose plant material in an oven; heat-not-burn devices heat a prepared tobacco stick. They look similar in a catalogue and are bought for different reasons: the dry-herb buyer wants temperature control over loose material, while the HNB buyer wants a repeatable, mess-free stick experience with no combustion.

CigGo builds both. The FyHit Eco-S and FyHit Relax are loose-leaf devices with ceramic ovens and precise temperature ranges — the Relax adds an OLED display and 120–225 °C control, the Eco-S runs six presets from a 2200 mAh cell. The FyHit Stick and FyHit Duo are heat-not-burn holders: the Stick heats a single stick with a ceramic ring and a 2500 mAh 18650 cell, the Duo holds two sticks with ceramic-plate heating, auto-clean and an 18-second heat cycle.

The engineering difference that matters in sourcing is thermal control. Loose-leaf ovens must hold a stable temperature across a session without scorching at the edges; HNB holders must reach working temperature fast and repeatably, because the stick is consumed in a fixed number of puffs. Both need cleanable, replaceable heating elements, which is where aftermarket support and warranty terms become part of the product.

Loose-leaf versus HNB

A loose-leaf device is a small oven: the user loads ground material, sets a temperature and draws. Session length, grind and pack density change the experience, so the device’s job is stable heat and an even extraction. Temperature presets are therefore a feature, not a gimmick — the Eco-S’s six presets and the Relax’s 120–225 °C range exist to keep the oven in a useful band.

An HNB device is a holder: the stick contains the material and the device heats it from the outside. There is no packing decision and no grind, so repeatability is the product. The Stick’s ceramic-ring heating and the Duo’s dual-stick ceramic-plate design with auto-clean and an 18-second cycle are built around that promise.

Batteries, cleaning and service life

Battery format drives the industrial design. The Stick uses a 2500 mAh 18650 cell, the Eco-S a built-in 2200 mAh cell; both are sized for a full session rather than for standby. Heating elements and ovens are the wear parts, so cleaning access and replaceable components matter more here than in a sealed disposable.

OEM work covers logo, colourway, packaging and language variants; ODM can adjust oven geometry, temperature curve and battery format. MOQ starts at 500 pcs, samples ship in 1–3 working days, bulk orders in 7–15 working days, and OEM orders in 10–25 days after sample confirmation. Devices carry a 3–6 month warranty against manufacturing defects.

Market notes

Dry-herb and HNB hardware is regulated differently from nicotine vapes, and in several markets the device and the consumable sit under separate rules. CigGo supplies the hardware and manufacturing documentation; market authorisation, labelling and consumable compliance remain with the importer. Confirm the target market’s requirements before committing to a specification.

Frequently asked questions

What is the difference between a dry herb vaporizer and a heat-not-burn device?

A dry herb vaporizer heats loose plant material in an oven with adjustable temperature. A heat-not-burn device heats a prepared tobacco stick in a holder, with no packing or grinding. Both avoid combustion, but the consumable, the session and the regulatory path differ.

Which FyHit models are loose-leaf and which are HNB?

The FyHit Eco-S and FyHit Relax are loose-leaf dry herb vaporizers. The FyHit Stick and FyHit Duo are heat-not-burn holders for prepared sticks — single-stick and dual-stick respectively.

What is the MOQ for a dry herb or HNB order?

Standard MOQ is 500 pcs per model, negotiable for first orders. Trial orders that mix a loose-leaf device and an HNB holder are possible — confirm the split with sales before ordering.

Can the temperature range be changed for our market?

Temperature curves and presets are part of ODM scope: the oven geometry, heating profile and battery format can be adjusted once volumes justify tooling. Send the range you need and sales will confirm feasibility.

Do you supply replacement ovens or heating elements?

Replacement parts are quoted per model and confirmed with sales. Because heating elements are the wear part on both architectures, the spare-parts route should be agreed at the same time as the device order.

Buyer guides

Request FOB pricing All 4 product families →